Actived Alumina - F200-E
Activated Alumina Specifications
|Bead size (in.)
||1/8", 3/16", 1/4" (custom sizes available
|Moisture removal at 40%RH
|Moisture removal at 60%RH
|Moisture removal at 100%RH
|Crush strenght (lbs)
||30-70 (depending on grade)
|Abrasion Loss (%/wt)
RH - Relative Humidity
%/wt - Percent Weight
We offer custom desiccant solutions. Desiccant with different characteristics are available. A sales professional can work with you to select a cost-effective desiccant solution that meets or exceeds your drying requirement. Service technicians are also available to change your dryer's desiccant and perform all other services.
Desiccant : Activated Alumina F200-E is the best all purpose desiccant for drying air and most other gases with high relative humidities. Dewpoints of -100° can be achieved (depending on dryer). Activated alumina F200-E can be used in both heated and heatless/pressure swing dryers.
Activated Alumina F200-E has: excellent porosity creating torturous paths and extended surface area; high strength against crushing; and very stable physical and chemical characteristics, even in high temperature and corrosive environments.
- -100°F dew points obtainable
- Unaffected by catastrophic liquid water loading
- Ideal for both heatless and heat regenerated systems
- Low regeneration temperature 250°F to 500°F